Electromagnetic Flowmeter Upto 3000 mm

• Measurement is virtually independent of density, viscosity, temperature, pressure and conductivity.
• Two measuring points inside tube and no moving parts to prevent pressure losses and pipe blockage.
• Electric conductive liquid and fluids with low solid contents can also be measured.
• Simple piping design: straight zone of the pipe for installation requests upstream 5D and downstream 2D.
• With self diagnosis function to check magnetizing signal, empty pipe and contaminated electrode.

Vortex Flowmeters

• Vortex flowmeter for use on various fluids such as steam, water and air
• Integrated temperature sensor, automatically corrects for mass flow rate
• Equipped with an integrated indicator
• Optionally measures steam dryness fraction (80-100%)

Open channel flow meter

• 9 different sizes, compact types of PARSHALL flumes made of plastic (PP)
• Factory calibrated dimensions
• Reliable measurement with ultrasonic level transmitter
• Level transmitter can be used for all flume types
• Displaying of flow measurement and average or total flow
• Certification of measurement

Mass Flow Meters Insertion

• Dual 4-20 mA outputs
• 4-20 mA per NAMUR NE43
• HART or Modbus I/O
• 500 Hz pulse output
• Process operating temperature : To 350°F [to 177°C]
• Maximum remote distance : 100' [30 m]
• SIL compliance rating
• SIL compliance rating

Mass Flow Meters Inline

• Vortab flow conditioning
• Dual 4-20 mA outputs
• 4-20 mA per NAMUR NE43
• HART or Modbus I/O
• 500 Hz pulse output
• Maximum remote distance : 100' [30 m]
• SIL compliance rating

Doppler Flow Meter

• Doppler flow meters for “dirty” liquid monitoring
• To suit pipes 13mm-4500mm
• 300000 point logger and software
• Non-invasive sensing
• Portable and Easy to use
• Single clamp-on transducer
• Fast, simple operation
• Rugged, waterproof
• On board data logger
• Free analysis software

Differential Pressure Flowmeter with Orifice Plate

• For basic to very demanding aggressive, abrasive or viscous media
• Up to +400°C / +752°F; max. 160 bar / 2320.1 psi (line pressure)
• Flange: DN50…600 / 2…24"
• 2-wire 4…20 mA/HART®, FF, Profibus-PA

Differential Pressure Flowmeter with Orifice Meter Run Assembly

• For small line sizes
• Up to +400°C / +752°F; max. 160 bar / 2320.1 psi; (line pressure)
• Sizes: DN15…100 / 3⁄4…2"
• 2-wire 4…20 mA/HART®, FF, Profibus-PA

Differential Pressure Flowmeter with Averaging Pitot Tube

• From basic to engineered versions
• Cryogenic to high temperatures possible (-200…+1000°C / -328…1832°F); max. 160 bar / 2320.1 psi (line pressure)
• Line sizes from DN50…2000 / 2…80" (larger on request)
• 2-wire 4…20 mA/HART®, FF, Profibus-PA

Differential Pressure Flowmeter with Cone Meter Run Assembly

• For basic to engineered versions for challenging flow conditions
• -270…+400°C / -454…+752°F possible; max. 160 bar / 2320.1 psi
• Size: optional DN100…3000 / 4…120"
• 2-wire 4…20 mA/HART®, FF, Profibus-PA

Ultrasonic Flowmeters for Liquid Process Applications

• Accurate 3-path meter: large dynamic range, maintenance-free, no pressure loss
• Cryogenic (-200°C/-328°F) and HT (+250°C/+482°F) versions; viscosities up to over 1000 cSt
• Flange: DN25…3000 / 1…120", max. PN200 / ASME Cl 1500; also weld-ends
• 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP

Ultrasonic Flowmeter for District Heating Applications

• 3-path meter for thermal energy measurement and heated water
• CT: OIML R75, MID MI-004 (Class 1, 2, 3)
• Flange: DN25…2000 / 1…80", max. PN40 / ASME Cl 300
• Max. +180°C / +356°F

Ultrasonic Clamp-on Flowmeter for Temporary Flow Measurement

• Portable, battery-powered meter, for on-site verification of process flows or inline meters at any location
• -40…+120°C/+248°F
• For pipes DN15…1500 / 1⁄2…60"
• With data logger and USB interface for data transfer

Ultrasonic Clamp-on Flowmeter for flow measurement of liquids

• Accurate 3-path meter: large dynamic range, maintenance-free, no pressure loss
• Cryogenic (-200°C/-328°F) and HT (+250°C/+482°F) versions; viscosities up to over 1000 cSt
• Flange: DN25…3000 / 1…120", max. PN200 / ASME Cl 1500; also weld-ends
• 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP

Ultrasonic Flowmeter for Superheated Steam and High Temperature Gases

• 2-path meter with optional mass flow and enthalpy calculation
• For steam billing, boiler or power plant monitoring (up to +620°C / +1148°F)
• DN100…1000 / 4…40"; max. PN250 / ASME Cl 2500
• Large turndown ratio (60:1)

Ultrasonic Flowmeter for Custody Transfer-CT Measurement of Liquid Hydrocarbons

• Multipath inline flowmeter for light crude oils and refined products
• CT: OIML R117, MI-005, API, GOST etc.
• Flange: 2…40"; max. ASME Cl 900
• -200…+220°C / -328…+364°F

Variable Area Flowmeter for Liquids and Gases

• Modular design: from mechanical indicator to 4…20 mA/HART®7, FF, Profibus-PA and totalizer
• Any installation position: vertical, horizontal or in fall pipes
• Flange: DN15…150 / 1⁄2…6"; also NPT, G, hygienic connections, etc
• -196…+400°C / -320…+752°F; max. 1000 barg / 14500 psig

• Mechanical or with electronic bargraph indicator (4…20 mA/HART®)
• Flange: DN15…25 / 1⁄2…1"; also NPT, G, hygienic connections, etc.
• -40…+200°C / +392°F; max. 145 barg / 2102 psig

Variable Area Flowmeter for Advanced Low Liquid and Gas Flows

• Mechanical or with electronic indicator (4…20 mA/HART®)
• Sturdy metal design: stainless steel or alloy
• Thread: G1⁄4, 1⁄4 NPT; others
• -40…+150°C / +302°F; max. 220 barg / 3190 psig

Variable Area Flowmeter for Low Pressure Gas Applications

• Glass tube with easy-to-read scale
• For use in gas supply lines of furnaces, protective gas or heating systems
• Flange: DN15…40 / 1⁄2…11⁄2"; also NPT, G, hose connection
• -20…+100°C / -4…+212°F; max. 1 barg / 14.5 psig

Variable Area Flowmeter for Low Liquid and Gas Flows

• Glass tube with easy-to-read scale, MIN/MAX switches
• Rugged steel plate housing for higher process safety
• Flange: DN15…50 / 1⁄2…2", max. PN40 / ASME Cl 300
• -20…+100°C / -4…+212°F