Probe with Form B Terminal Head for Standard Applications
Probe with Form B Terminal Head for Standard Applications
With built-in measuring insert
As single or double RTD temperature probe
Terminal head form B or BUZ
Available with transmitter
Probe with Form J Terminal Head
For temperatures from -50 to +400 °C
As single or double RTD temperature probe
Available with transmitter
Protection type IP65
Probe with Plug Connector
For temperatures from -50 to +270 °C (for the short term up to 300 °C)
Vibration-resistant construction
Different plug connectors; locked against contact
Protection type up to IP67 / IP69 according to DIN EN 60529 (IP69K according to DIN 40050)
Probe with Connector According to DIN EN 175301
For temperatures from -50 to +260 °C
Vibration-resistant construction
Plug connector locked against contact, protection type IP65
Available with transmitter
GL approval for basic types 902044/20 and 902044/21 (max. insertion length 200 mm)
Probe with Connecting Cable
For temperatures from -50 to +400 °C
As single or double RTD temperature probe
In two-wire, three-wire, or four-wire circuit
Connecting cable PVC, silicone, PTFE, metal braiding
Devices and Plants Tested According to DIN EN 14597
For heat conducting systems according to DIN 4754
For temperatures of up to 700 °C
As single, double, or triple RTD temperature probes
For water, oil, or air
For tested control and limitation devices
Probe with Connector According to DIN EN 175301
For temperatures from -50 to +400 °C
Various probe tips available
Protection tube and probe tip in stainless steel
Ceramic insulated probe tip
In two-wire circuit, three-wire circuit, or four-wire circuit
Probe with Form B Terminal Head
For temperatures from -50 to +600 °C
With interchangeable measuring insert
As single or double RTD temperature probe
Terminal head form B, BUZ, BUZH, BBK
Available with transmitter
Probe with Form B Terminal Head for Standard Applications
For temperatures from -50 to +400 °C
With built-in measuring insert
As single or double RTD temperature probe
Terminal head form B or BUZ
Available with transmitter
Probe with Form J Terminal Head
For temperatures from -50 to +400 °C
As single or double RTD temperature probe
Available with transmitter
Protection class IP65
Probe with Connecting Cable
For temperatures from -50 to +400 °C
As single or double RTD temperature probe
In 2-wire circuit, 3-wire circuit, or 4-wire circuit
Connecting cable PVC, silicone, PTFE, metal braiding
Connecting Cable for Solar Thermal Systems
For temperatures from -50 to +260 °C
Long-term stability
Cost-effective design for solar thermal systems
Connecting cable made of PVC, PUR, silicone, or PTFE
Probe with Bayonet Connection
For temperatures from -50 to +400 °C
With protection tubes made of various materials
As single or double RTD temperature probe
Good heat transfer through adjustable spring pressure
Installation and removal without tools
Probe with Connecting Cable
For temperatures from -50 (-200) to +600 °C
Flexible sheath cable with vibration-resistant measuring insert
As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
Quick response time
Application-specific insertion length
Form B Terminal Head According to DIN EN 60751
For temperatures from -50 (-200) to +600 °C
Flexible sheath cable with vibration-resistant measuring insert
As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
Quick response time
Application-specific insertion length
Form J Terminal Head According to DIN EN 60751
For temperatures from -50 (-200) to +600 °C
Flexible sheath cable with vibration-resistant measuring insert
As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
Quick response time
Application-specific insertion length
Probe with LEMO Coupling According to DIN EN 60751
For temperatures from -50 (-200) to +600 °C
Flexible sheath cable with vibration-resistant measuring insert
As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
Quick response time
Application-specific insertion length
Probe with Connecting Cable According to DIN EN 60751
For temperatures from -50 (-200) to +600 °C
Flexible sheath cable with vibration-resistant measuring insert
As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
Quick response time
Application-specific insertion length
FOODtemp Insertion RTD Temperature Probe
For temperatures from -50 to +260 °C
Steam-tight and pressure-resistant
High mechanical strength
Available with multiple measuring points
HEATtemp – Temperature Probe Pairs with Different Probe Versions
For temperatures from 0 to 150 °C
Combination of different probe versions from all known JUMO type examination certificates into one pair
Probe pairs with different cable lengths
Suitable for compact heat meters
Fulfills the requirements of DIN EN 1434, AGFW 202, and FW211
Production according to module D (MID)
Coordinated accessories for installation (data and price sheets 902440 and 902442)
HEATtemp Push-In RTD Temperature Probe for Heat Meters with Connecting Cable for Thermowells
For temperatures from 0 to 180 °C
Type examination certificate for MID heat meters and domestic approval for cold meters as replaceable temperature probes
Fulfills the requirements of DIN EN 1434, AGFW 202, and FW211
Pairing and declaration of conformity in accordance with German Weights and Measures Act and MID
Production certified according to module D (MID) (CE and metrology identification marking)
Coordinated accessories for installation (data and price sheets 902440 and 902442)
HEATtemp – Push-In RTD Temperature Probes for Heat Meters with Connecting Cable for Thermowells
For temperatures from 0 to 180 °C
Type examination certificate for MID heat meters as replaceable temperature probes
Fulfills the requirements of DIN EN 1434, AGFW FW202, and FW211
Pairing and declaration of conformity according to MID
Production certified according to module D (MID) (CE and metrology identification marking)
Coordinated accessories for installation (data and price sheets 902440 and 902442)
Indoor and Outdoor RTD Temperature Probe
For temperatures from -50 to +90 °C
For application in air conditioning technology
Protection type IP20 to IP65
Connection available in two-wire, three-wire, or four-wire circuit
Available with analog transmitter
Channel RTD Temperature Probe
For temperatures from -50 to +200 °C
For use in air-conditioning technology
Protection type IP20 to IP65
Connection available in two-wire, three-wire, or four-wire circuit
Available with analog transmitter
Surface RTD Temperature Probe with Connecting Cable
For temperatures from -50 to +260 °C
With protection fittings made from various materials
Simple and quick installation
Low thermal mass
Good thermal transfer from the measuring point to the sensor
Surface RTD Temperature Probe
For temperatures from -50 to +120 °C
As a pipe-mounted probe or surface probe
For round and flat surfaces
Simple and quick installation
Low thermal mass
Good thermal transfer from the measuring point to the sensor
Test Equipment for Temperature and its Traceability - Pt100 Precision RTD Temperature Probe
Pt100 precision RTD temperature probe
For temperatures from -200 to +450 °C
Test equipment calibrated by DAkkS (DKD – German calibration service)
Measurement results are traceable to national standards
Test Equipment for Temperature and its Traceability - Temperature Measuring Chains
Precision temperature indicating device
Includes Pt100 precision RTD temperature probe
Also available with thermocouple for higher temperatures
USB interface
Mains operation possible
Test equipment calibrated by DAkkS (DKD – German calibration service)
Measurement results are traceable to national standards
RTD Temperature Probe for the Food and Pharmaceutical Industry
For temperatures from -50 to +250 °C
Protection type up to IP69 according to DIN EN 60529 (IP69K according to DIN 40050)
Hygienic process connections
Stainless steel protection tubes
Available with two-wire transmitter
CIP-compliant installation
Dtrans T100 – Screw-In RTD Temperature Probe without or with Transmitter
For temperatures from -50 to +260 °C
Hygienic process connections
RoHS conformity for EU and China
Configuration with setup program via USB interface
M12 × 1 plug connection; protection type IP67 according to DIN EN 60529 with pushed in machine connector
PROCESStemp RTD Temperature Probe for Process Technology with Ex Approval
For temperatures from -200 to +600 °C
With protection tubes made of stainless steel, titanium, tantalum, Inconel®, and HASTELLOY®
Available with two-wire transmitter (4 to 20 mA/HART®) in Ex version
II 1/2 G Ex ia IIC T6 ... T1 Ga/Gb¹
II 1/2 D Ex ia IIIC T80 ... T400 °C Da/Db¹
II 1/2 G Ex ia/d IIC T6 ... T1 Ga/Gb¹
II 1/2 D Ex ia/tb IIIC T80 ... T400 °C¹
With interchangeable measuring insert (not for Ex basic types)
STEAMtemp Push-In RTD Temperature Probe in Steam-Tight Version
For temperatures from -70 to +200 °C
As single, double, or triple RTD temperature probe
In two-wire, three-wire, or four-wire circuit
Connecting cable PTFE, FEP, and silicone
MarineTemp – Screw-in RTD Temperature Probe for Marine Applications from -50 to 400 °C
Available as two-wire or four-wire RTD temperature probes
Terminal head form B or BUZ
Available with transmitter
With maritime type approval Bureau Veritas
Level and Temperature Probe for Utility Vehicles as Well as Construction and Agricultural Machinery
For temperatures from -40 to +140 °C
As level or combined level and temperature probe
Connecting cable: cross-linked polyester
Installation position: standing or suspended
Measuring path of 50 mm or 62 mm
CANtrans T RTD Temperature Probe with CANopen Output
For temperatures from -50 to +450 °C
As single or double RTD temperature probe
Vibration-resistant design
Limit value monitoring
Setting via customary CANopen software tools
Wtrans T - RTD Temperature Probe with Wireless Data Transmission
For stationary and mobile measurements
Measuring ranges: -30 to +260 °C or -200 to +600 °C
Radio frequency: 868.4 MHz or 915 MHz
Also available with ATEX approval
Open air range up to 300 m
Configurable transmission interval (1 to 3600 s)
Wtrans Receiver - Universal Receiver for JUMO Wireless Measuring Probes
Universal receiver for JUMO wireless measuring probes
In combination with corresponding transmitter for RTD temperature probes, thermocouples, resistance/potentiometer, voltage input, or pressure measurement
For up to 16 transmitters per receiver (can be freely combined)
RS485 interface with Modbus protocol
Up to four analog outputs/up to two switching outputs (relay)
DELOS T – Electronic Temperature Switch with Display and Analog Output
For temperatures from -50 to +260 °C (500 °C)
Hygienic process connections
Configuration performed with the rotary encoder on the temperature switch or setup program
M12 × 1 plug connector; protection type IP67 according to DIN EN 60529 with pushed in machine connector
Positively lit LCD display
dTRANS T1000 – Temperature Sensor with IO-Link
Small, compact, robust
High degree of accuracy
Various process connections
Simple startup
Easy sensor replacement
Wtrans Receiver - Universal Receiver for JUMO Wireless Measuring Probes
For temperatures from -40 to +180 °C
Precise pipe adaptation through full contact to surface area
Simple and fast mounting without tools
Heat-conductible plastic
Water-tight, IP65
70 % quicker mounting with the clip in comparison to mounting with a conventional hose clamp
