Temperature Two-Wire Transmitter
- Designs for B head or DIN-rail mounting
- RTD temperature probes and thermocouples
- Galvanic isolation
- Output two-wire 4 to 20 mA, HART® interface
- Also available with Ex approval
- Configuration with setup program
Temperature Four-Wire Transmitter
- Design width 17.5 or 22.5 mm
- Mounting on DIN rail, 35 mm
- Universal measurement input
- Galvanic isolation
- Current output, voltage output
- LCD display
- Ex and IECEx approval
- Configuration with setup program
Temperature Two-Wire or Three-Wire Transmitter
- Designs for B head, J head, or DIN-rail mounting
- Pt100
- Analog measured value processing
- Output: two-wire (4 to 20 mA) or three-wire (0 to 10 V)
- Configuration with setup program
Temperature Four-Wire Transmitter
- Design width 22.5 mm
- Pt100, Pt1000, and potentiometer
- Adjustable with DIP switches
- Analog measured value processing
- Output 0(4) to 20 mA, 0 to 10 V
- Configuration with setup program
Temperature Programmable Two-Wire Transmitter
- Measuring input for RTD temperature probe, thermocouple, resistor/potentiometer, resistance transmitter, and voltage
- Input and output are galvanically isolated
- Control LED (red/green)
- Configuration directly via USB cable without additional auxiliary voltage
- Customer-specific linearization
- Detection of the min./max. process value (drag indicator function including point in time)
Wtrans B - Programmable Head Transmitter with Wireless Data Transmission
- For stationary and mobile measurements
- Universal measurement input
- Radio frequency 868.4 MHz
- Open air range up to 300 m
- Configurable transmission interval (1 to 3600 s)
dTRANS T06 – Multifunctional Four-Wire Transmitter
- High level of galvanic signal isolation
- Customer-specific linearization
- Output simulation
- Min. and max. drag indicator function
- Operating hours counter
- Convenient setup configuration (USB powered)
Multifunctional Four-Wire Transmitter in Mounting Rail Case
- Universal input for a large number of sensors and standard signals
- Intuitive operation and configuration on the device or through USB interface with setup program
- RS485 interface (Modbus RTU) and relay output limit value (option)
- Intelligent additional functions such as min./max. drag indicator, operating hours counter, and output simulation
- SIL 2/SIL 3 according to DIN EN 61508 and PL c/d according to DIN ISO 13849 (option)
- Sensor matching for RTD temperature probes
- Customer-specific linearization
- High galvanic signal separation
- Service and operation hours counter
- Connection diagram retrievable in the display
Two-Channel Temperature Transmitter with HART®-Ex-SIL
- 2 universal measurement inputs (RTD, TC, Ω, mV)
- High degree of accuracy (0.1 K with Pt100 sensor)
- Output 4 to 20 mA (single channel, loop powered)
- 2 enclosure versions (B-head or DIN rail)
- HART® 7 protocol
- SIL 2/3 hardware/software according to IEC 61 508
- Reliable measurement mode through sensor monitoring and device hardware error detection
- Optional plug-on display for B-head device version
dTRANS T08 – Temperature Transmitter Series 6 mm
- High degree of basic accuracy of up to 0.05 % for all selected temperature measuring ranges
- Rapid startup, up to 1,000 measuring ranges can be set via DIP switches
- Response time up to <30 ms
- High interference immunity according to NAMUR NE21
- Large ambient temperature range of -25 to +70 °C for precise measurements
- Low temperature coefficient with errors <0.01 %/°C
- Close mounting
dTRANS S08 xx – Signal and Isolating Converter Series 6 mm
- Input and output signal types of the signal converters can be set quickly and simply via DIP switches
- Basic accuracy for standard signal isolation of up to 0.05 %
- Fastest conversion of standard signals for control systems (response time up to <7 ms)
- Safe galvanic signal separation (2500 V AC for all devices)
- Low power consumption (<0.65 to 1.2 W)
- Large ambient temperature range of -25 to +70 °C
- Close-density mounting
Ex-i Repeater Power Supply - Input Isolating Amplifier
- HART capable
- SIL2 approval
- Universal power supply
